Recent content by dmlipat

thanks guys. [thumbsup2]

I have a phone located at the lobby and want to limit pstn calls to 5min every call. is that possible in ip office?

I have a main site (g450/s8300 main server) and a remote site (g430/s8300 LSP ), main site is on location 1 and remote site is on location 2. Is it possible to have a local receptionist (0) on the remote site and another receptionist (0) on the main site. whereby users press 0 and will direct to...

try assigning a public ip address to the IPO (LAN2).

@peter: by this you mean phone can't register to the system? @madwok how about if i change to vmpro?

thnks for the quick response... thought something missing on system..

Is it possible to set up a voicemail (embedded voicemail) on a sip phone without a VCM module? or should i go with vmpro on this?

here is the trace list trace station 2100 Page 1 LIST TRACE time data 13:23:01 Calling party trunk-group 82 member 1 cid 0xec 13:23:01 Calling Number & Name NO-CPNumber NO-CPName 13:23:01...

by setting the queue length to zero disable queuing then yes queuing is disable

I have a setup where a user have a remote coverage path to his mobile phone. this works fine until recently i found out that whenever the trunks(analog trunks) are all used up the caller still hears a ringing tone while the system handle the calls. is it possible to have busy-tone instead since...

thanks a lot smash, i can access the wholes site. I was thinking that when scn discovery was enable that was it, it should get things done.im glad i was wrong here..:->

We are able to configure scn with 5 different sites. Site to site calls are successful. But it cannot view in manager the other sites. I already enable scn discovery and system are running on R8.0(16). However i can login to other sites one a time by manually entering the ip address. H.323 trunk...

thank for all the replys guys, anyways got any idea why the secondary tone change when the i used line id of the trunk instead of the ars id. i had all my users, restriction and ars under user rights for easier management. but i found out that the secondary dial tone change when using the line...

@bas i tried playing with it but i hear the same tone either system or network. @tlpeter this customer previously used panasonic and that system is capable of changing the secondary dial tone. they insisted to have this feature. and its one of the reasons they wont signed the acceptance of...

tnx for the reply bas,i will give this a try tonight. although i was able the change the secondary dial tone when i tried using a different locale "belgium" and all others setting set to default including locale set in the ars was set to blank. it seems that some local have the same dial tone...