Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ccmjgb

  1. ccmjgb

    HiPath 4000 v5 end of support

    Thank you again!
  2. ccmjgb

    HiPath 4000 v5 end of support

    Thank you both very much for your help! So I guess after 2018-02-28, no fixing is available via Unify - correct?
  3. ccmjgb

    HiPath 4000 v5 end of support

    Hi everyone, Does anyone know if Unify has announced end of support for the HiPath 4000 v5? If so, what's the timeframe and where can this detail be found? Thank you!
  4. ccmjgb

    what amo can i use to tell if digital port is equipped with a phone

    Great, thank you sbcsu! I appreciate the help.
  5. ccmjgb

    what amo can i use to tell if digital port is equipped with a phone

    Greetings, I need to go through some ports to see which are equipped with phones and which have no device attached. Can someone please assist with the RMX command that will help me locate 'unused' digital ports? Thank you!
  6. ccmjgb

    move analog station using RMX Hipath 4000 v5

    thank you very much sbcsu! ... I've yet to try it out, but will as soon as I get a chance. I'll let you know how it goes. Thank you again.
  7. ccmjgb

    move analog station using RMX Hipath 4000 v5

    hey sbscu, got it... del-actda etc... thank you again!! If I may, can you please provide a little insight into the sign-off / sign-on feature and how to use?
  8. ccmjgb

    move analog station using RMX Hipath 4000 v5

    Thank you sbcsu! yes, the DIS-SCSU shows DND activated on that phone... Can you please provide some guidance on how to disable the DND on the analog set?
  9. ccmjgb

    move analog station using RMX Hipath 4000 v5

    a little history on this... intially it was reported that the analog station in question had a busy signal... i called it and confirmed it was giving a busy signal, it didn't sound like a regular busy but more like a stuttered DT... I used CM to move it to a free analog port with the intent of...
  10. ccmjgb

    move analog station using RMX Hipath 4000 v5

    Hi all, I use CM to complete most MACs... CM is not allowing me to move an analog station and gives me error code: DB Backup in progress. (1013) The DB was backed up using exe-updat:bp,all; and exe-updat:a1,all; (twice each) about 20 minutes ago and the System shows Synchrounous across...
  11. ccmjgb

    pull CDR record from HiPath 4000

    thank you for the feedback sbcsu... will leave as is.
  12. ccmjgb

    pull CDR record from HiPath 4000

    thank you sbcsu! DIS-SELS; (all off) DIS-LSSM; (port 1201 and 1202 both have IP 192.0.2.3) so that's that... out of curiosity... do you know how many entries the CDR Buffer will hold before the alarm triggers? also... how would I turn on the CDR logging to buffer in case I would need to...
  13. ccmjgb

    pull CDR record from HiPath 4000

    so based on your comment... is it not possible to extract a couple calls that came in last week? can Assistant assist?
  14. ccmjgb

    pull CDR record from HiPath 4000

    Hi all, I've been asked to pull a couple of CDR records for Inbound calls to a couple of stations during a specific time frame. Can someone please provide some AMO guidance and also how I can pull using Assistant? There is no CDR logger connected to the HiPath 4000 so I'm assuming the CDRs...
  15. ccmjgb

    HiPath 4000 UNIX recovery

    thank you again sbcsu!
See more

Part and Inventory Search

Back
Top