Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by CallLuke

  1. CallLuke

    T7020 on D1232

    obt, Thanks so much, XDP was it.
  2. CallLuke

    T7020 on D1232

    Thanks. I have the 2 pairs connected. If I turn off xdp, will that disable my xdp sets? Is it possible to use xdp and hybrid sets simultaneously?
  3. CallLuke

    T7020 on D1232

    I am trying to add some 7020 phones to some unused ports on a D1232 with. I only get dead air on the hand sets, you can dial numbers, but no other buttons work. I have checked the wiring and everything looks ok..I have both pairs hooked up and polarity correct. Any ideas on what I am missing?
  4. CallLuke

    Restricting Calls on UCx

    Just a thought.. The easiest solution there might be to just use sip phones for your friend, like one of the linksys spa phones. That way you could create custom dial plans in those phones to only allow exact matches to be dialed. Here is an example dial plan i made based on your requirements...
  5. CallLuke

    Hold / Held Reminder

    Is there a way to set a reminder for a call on hold. I don't want a parking lot timeout, Just some sort of reminder. I am using 1140e's Thanks!
  6. CallLuke

    "Appear" but not ring

    Ok what would be the best way to have the reception phones all ring and have anyone else be able to see and answer those calls? Is there anyway they could see who is calling without picking it up (like feature 811)?
  7. CallLuke

    "Appear" but not ring

    Is there any way have a line (SLA) appear on a phone, similar to "appear only" on the Norstar? Want it flash but not ring and be able to press the button to answer. A bonus would to be able to see caller ID before answering ;o
  8. CallLuke

    Conference Calls

    Sorry - should have been more specific, I mean when the conference is initiated from the phone by pressing Conference and then Join. Also, a single conference with two outside parties ends up using 3 SLA keys, is there a way to change that?
  9. CallLuke

    Conference Calls

    Is there a way to break a conference call or disconnect / hold one party ?
  10. CallLuke

    RAD with Ooma or Magic Jack

    Actually I've had good luck with fax / modem calls using the Obi100 with Google Voice. I've never tried using it with RAD, but I have used it for other data calls and many faxes and never has one failed
  11. CallLuke

    MICS & SIP what are the uses

    I've found the Cisco SPA8000 to be an excellent way to bring VOIP to the Norstars. It breaks a SIP trunk into 8 analog lines.
  12. CallLuke

    Information greeting / transfer

    Company with MICS and Callpilot 100 just moved to a new location. Would like to set up a greeting that answers immediately to announce the move before the call goes to the office. Currently using ccr tree set up with extensive menus set to answer after 5 rings. Is there any way to have an...
  13. CallLuke

    Off primise transfer thru call pilot???

    You can still use options 2 and 3, the system waits after the number is pressed to see if a full DN is dialed.
  14. CallLuke

    Paging

    Yes, you should be able to just press park and then hit the preprogrammed page button to make your announcement.
  15. CallLuke

    Call log

    Goto Terminals&Sets, Enter the extension of the phone you want to change. Then goto "Telco Features"> "log space"> It will display the number of log spaces assigned to that phone and the number available in the system pool. press ADD on the screen and enter the desired number of log spaces...

Part and Inventory Search

Back
Top