Recent content by bryan408

need help please !!!

Hi, I have a Dell Latitude D830 (Intel Duo core 2 2.4Ghz, GMA X3100 graphic card) that I'm trying to install Solaris 10 version 11/06 from a DVD. It's always rebooting when boot up from 64bit. I try to boot 32 bit and instead of giving me the login screen, it shows no video and I have to reset...

any other solution?

I cannot login with a new password on the sc. It keeps saying invalid password. # ./scadm resetrsc -s It doesn't help anything......

I already did reset the sc after but i still have the same problem invalid password. ./scadm resetsc It seems like it only reset to a default state or maybe a beginning state when we set a admin password for sc. Thank you very much for your replies, Bryan

Somehow i cannot override the ALOM password for V240 and this is exactly what i did to my V240. 1) Attach console to Serial Management Port 2) Power on V240 and wait 1 to 2 minutes for a timeout to occur and the system to drop to the "ok>" prompt. Please login: SC Alert: Host...

hi AA, thanks for your reply. Please check this out http://sunsolve6.sun.com/search/advsearch.do?collection=PATCH&type=collections&queryKey5=119234&toDocument=yes 6246407 TFTP boot on WANboot capable proms hangs if duplicate TFTP data blocks are received 6246421 Limit number of TFTP timeout...

here is my jumpstart problem: 1. V240 with OBP 4.16.x i can be able to boot up from jumpstart with no problem. 2. V240 with latest OBP version 4.22.33 i can't jumpstart at all.....and this is how the screen looks like: {ok} boot net -install Boot device: /pci@1f,700000/network@2 File and...

hi ceh4702, do you mean by clear the CMOS with Jumper setting? I already did and obviously it is not the case. to ricefd, there are 2 different power connectors one is ATX 24 and the other one is 4pin connector (+12V and gnd) which are already plugged in....

if this is the case, then i'd have to go to Fry's and exchange for a good one. Anyway how do i know this time i'd get a working one? Is there any way to test if it is a good one or just bring back home plug everything and hope it will work though.... thanks alot for your input vacunita have a...

yeah i already tried only motherboard and cpu no memory no drives no addon cards....when turn on power there is no beep at all....fan is on though...

is there any jumper setting for these? i already checked the user manual online i ain't see any jumper setting though..... the thing is i m not sure the spark plugs failed or the engine failed... i need to figure it out step by step don't you think???

Video card on board there is no beep sound when i turn it on nothing display at Monitor (LED light is still Yellow at Monitor) Voltage supply is ok +5V +3.3V +12V I got that CPU from my co-worker and the motherboard at Frys, so i don't know which one i have to return or exchange for a new one.

hi room, i just bought a new pc, so exciting to bring it up but it turned out there is no video at all after setting up...please help!!! Motherboard PMB-601LF Protech System Memory Wintec PC2-5300/1GB/E/R Power Supply SPI 500W CPU Intel Core 2 Dual 2.13GHz 1066Mhz FSB 2MB L2 Cache

so we know that the system is multiprocessor 2xCPU2.8Ghz and it is running fine except the overheat message from Sandra burn-in test. all im wondering is that why we have these warning message though ???? Any Sandra expert in here :) btw, thanks Tony for all of your responses Bryan