Jumpstart problem on V240

[bryan408]

here is my jumpstart problem:

1. V240 with OBP 4.16.x i can be able to boot up from jumpstart with no problem.

2. V240 with latest OBP version 4.22.33 i can't jumpstart at all.....and this is how the screen looks like:

{ok} boot net -install
Boot device: /pci@1f,700000/network@2 File and args: -install
100Mbps FDX Link up
Requesting Internet Address for 0:3:ba:48:f0:8b
The file just loaded does not appear to be executable
{ok}
using snoop i can see it download 315 Blocks from boot server and that is it

 

[AnotherAlan]

bryan408,

Not that it helps you much but I am also experiencing difficulty with jumpstarting a server with the same OBP level.
A different problem in that the nic configuration keeps failing mid jump.
If I find anything I'll be sure to post.

 

[bryan408]

hi AA,
thanks for your reply. Please check this out

http://sunsolve6.sun.com/search/adv...e=collections&queryKey5=119234&toDocument=yes

6246407 TFTP boot on WANboot capable proms hangs if duplicate TFTP data blocks are received
6246421 Limit number of TFTP timeout messages during boot

these id errors in SUN new OBP could be a problem ???