Recent content by BrixStand

Hi Piotr, that is a good question. He didn't try. But I'll try and let you know. I'm on vacation now. I will try it next week.

You have to one system NS1000 and the second can be NS500. Is possible to use in mode One-Look. Two NS500 as master and slave not be used. Only as QSIG connection IP Gateway used mode Tie Trunk.

NEC seems to have figured out how to get payment from customers and has extended the license period including SWA and technical support, but only with PBXs with a valid SWA. https://res.cloudinary.com/engineering-com/image/upload/v1721814733/tips/UC_OnPrem_Comms_for_SWA_Extension_vEMEA_nhhndm.pdf

To nx965 The AP500 was not developed by the NEC manufacturer, but by the Danish company RTX So you can continue with, for example, SNOM M900. But the systems are not officially compatible with each other. Although I managed to upload SNOM fw to AP500. and G277 handsets work.

Hello, What is the MPR and DLC16 firmware version? the DT5xx series requires the latest firmware in the PBX. You must have MPR fw version: 5.0030 And also it is necessary to have upgraded fw DLC16 to version: 8.001

Yes you're right. According to the documentation available from the manufacturer, there is no problem using VRS as an Automatic Attendant. The AA VRS feature in the PBX is specifically designed for this use. Using INMAIL as a priority when requesting a simple IVR tree is unnecessary in terms of...

Disabling the ability to dial external lines in the DISA/VRS/Automatic Attendant 1-digit Code system is only possible when using the following steps: 22-X Incoming Call Service – 22-11 DDI Translation table – 22-11-05 Target 2 – 401 DISA 25-02 VRS/DISA Message – on a specific Trunk, select...

Hello gentlemen, I went through all your advice. Thank you very much for your advice. I found in testing that your advice does not apply to my problem. The setting of restrictions between individual groups of departments is clear to me and I understand it. But what do I need? Screenplay: In the...

It is interesting, I believe it. I don't know how you try. You have more experience than me. So I have to think about how to set it up as you describe and try it out as well. Don't have a configuration backup available? It would help me a lot.

answer for Ozzie George and Coraltech Your solution solves a situation related to the possibility of banning calls to specific offer numbers. This means that: For the sales department, choose 1 For the technical department, dial 2 We knew that. The problem arises in a situation where the...

Hi all, I dealt with a similar request. We replaced the PABX from the original manufacturer MATRA (NeXspan), a technology that is about 30 years old. The customer had an IVR (Automatic attendant) - 1 digit code attendant created on the system. It was normal for the customer to be able to...

https://files.engineering.com/getfile.aspx?folder=05cf98c9-c73d-4672-8930-abe1449c50ef&file=MRG.jpg https://files.engineering.com/getfile.aspx?folder=05cf98c9-c73d-4672-8930-abe1449c50ef&file=MRG.jpg

The part of the Trunk setting that relates to the secondary PBX must be set when connecting to the secondary PBX, which is reflected in the description. It is also interesting that we have the experience of using profile 1 in both PBXs. The procedure is important to do as follows: First, connect...

Dear mr_infek, I have practice experience with NETLINK - One SIP Trunk on the primary system and second SIP Trunk on the Secondary system. This notice is in own language, you must translate it by google or so on, etc...

Thank you very much for the confirmation. It helped me a lot to avoid trying to figure this out unnecessarily. Setup using webpro with user restriction is the solution for me. It's a real shame that you can't do it by phone, but it can be accepted. Thanks