Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by BrightTech

  1. BrightTech

    SD Card Failure

    Mmmmm I do them all over the country from the comfort of my home Office, would hate to have to drive 1300km to Cape Town to upgrade a system. What I do often though is I update a PC on the local site and remote control that. That also works a charm, but since the new admin cd downloads are...
  2. BrightTech

    SD Card Failure

    I have only experienced this when doing remote upgrades, dont know if that sheds any light on the matter
  3. BrightTech

    6.0.8 SMDR via Hyperterminal ?

    Just a suggestion, I downloaded Kiwi_Syslog_Server_9.1.0, and set this up to log the data, it runs as a service and is free in its native form, and is VERY stable. Then I wrote a batch file: rem Batch file to rename a file with date stamp echo off net stop "Kiwi Syslog Server" set...
  4. BrightTech

    SMTP logging for vmpro

    Bas, just one question, in 2008 server the interact with desktop does not seem to work the way it did on 2003. You dont see the VMPro application, but it pops up every now and then saying a background task requires attention. How do you get it to be visible all the time? Thanks in advance Kevin
  5. BrightTech

    Need to block extensions dialing each other, replace with hunt group

    Well I am in SA, so the rules governing the UK do not apply :-). So I am going to try this tomorrow and will let you know of my success. Thanks for the suggestion Taker Cheers Kevin
  6. BrightTech

    Need to block extensions dialing each other, replace with hunt group

    Hi Robb If I set the announcements to 0 in the VMPro, surely this will affect the transfer of calls tot he agents, would it not create a never ending loop? Thanks in advance Kevin
  7. BrightTech

    Need to block extensions dialing each other, replace with hunt group

    I have done the 89X, dial , 4001, and with the combination of using digits dialed = 3, the system still find the best match in the original extention and dials that...
  8. BrightTech

    Phantom handsfree answering issue

    There is a setting on the phone: Press Features, scroll to call setting, then scroll to internal auto answer and make sure it is off. I had this at a customer and it drove me scatty for weeks because you cannot see this setting on a system level, can only be done on the phone. Hope this helps
  9. BrightTech

    Need to block extensions dialing each other, replace with hunt group

    Ok so with the bad news that you guys are giving me, what report would you suggest I run so that management can tackle the people phoning the agents directly? I would like something that just reports on internal calls, I have not seen anything like that, and whilst I am on reporting when will we...
  10. BrightTech

    Need to block extensions dialing each other, replace with hunt group

    Hey customer is King and what customer wants, customer normally gets.... The problem is certain agents are being targeted because they are better than the others, I am sure you know this story...
  11. BrightTech

    Need to block extensions dialing each other, replace with hunt group

    Good morning all. I am hoping there is a solution to this. I have a customer with CCR, IPO V6.0(18). What they want to do is prevent anyone in the company from dialing the agents in the call centre directly, but rather if the caller dials the agent number, eg 8950, then replace it with 4001...
  12. BrightTech

    9650 VPN Phone

    Nope this is a Juniper, with a network from hell behind it
  13. BrightTech

    9650 VPN Phone

    I will have to ask the Juniper Pro about that, he has left Yet again. Will get back to you later, if not today then have a great weekend
  14. BrightTech

    9650 VPN Phone

    On the Juniper we had to set 192.168.2.0/24 on the mode config to get the tunnel up, I assume you are refering to the Proxy ID settings
  15. BrightTech

    9650 VPN Phone

    This is what I have in my 46xxsettings.txt file SET NVVPNMODE 1 SET NVVPNSVENDOR 1 SET NVVPNCFGPROF 5 SET NVIKECONFIGMODE 1 SET NVIKEIDTYPE 2 SET NVIKEXCHGMODE 1 SET VPNPROC 2 SET NVVPNAUTHTYPE 4 SET NVXAUTH 1 SET NVSGIP xxx.xxx.xxx.xxx SET NVIKEID fvx_remote SET NVIKEPSK xxxxxxxxxxxxxx...

Part and Inventory Search

Back
Top