Recent content by belzs

HI Armstrong2012 download the document from my dropboxhttps://dl.dropbox.com/u/9758007/Replacing%20the%20G700%20Media%20Gateway.pdf

hi i am using CallPilot Manager version 02.01.27.05. I want to restrict the ability for calls to be from callpilot out to the PSTN both local and international. How do i do this, i suspect i am experiencing toll fraud.

Hi North323, thanks for the update i managed to get it working. 1) I have a server 10.40.120.20 at the local site that I want to backup to a remote site 10.40.101.20 2) I want to route that traffic over the secondary link fa0/3/0 or 10.200.5.45 3) Then i applied the policy on the local LAN...

Hi Guys i have a unique problem and i hope someone could help me. I have 2 WAN links connected to my router, one of the links is the main and the other is the redundancy/backup link. This link is hardly ever used unless the primary fails. I would like to route traffic from that location to...

i am getting a fast busy

thanks Pir8Radio that worked i can dial the number. I am still getting a busytone after though. but the number is nto busy because if i call it from my cell i get connected.

ok i am assuming that the RLI are 0, 1 and 10 and i am entering REQ chg CUST 0 FEAT net TRAN ac1 TYPE nxx NXX 976 ? what do i do next. I am not familiar with nortel administration

How do i figure out which RLI i would need to use REQ prt CUST 0 FEAT rlb RLI RLI 0 ENTR 0 LTER NO ROUT 0 TOD 0 ON 1 ON 2 ON 3 ON 4 ON 5 ON 6 ON 7 ON VNS NO CNV NO EXP NO FRL 0 DMI 0 FCI 0 FSNI 0 BNE NO SBOC NRR IDBB DBD IOHQ NO OHQ NO CBQ NO ISET 0 NALT...

how do i add/program that?

our emergency number is 511

to get an outside line we dial "9" the the 7 digit number. We have recently had local 7 digit numbers beginning with "9" example 976-2376. when dialing 9 976-2376 the pbx gives a fast busy signal after 9 97. how can we fix this?

how do i stop caller id that is blocked form the telephone company from showing on my ip phones.