Recent content by banbdi

if i put for example 8355 works fine but 8300 not work 83 not work on the CS100S i have extension like 8301 but on the asterisk i have extension 8302 :(

ok, try this DISK SPACE NEEDED: 250 KBYTES REQ new CUST 0 FEAT cdp TYPE dsc DSC 8 ESN011 DSC ! >err esn011 > ESN0011 Conflicts with existing number.

ok, thanks again for time and help

ok, thanks but one question the cdp can do this with extensions in the same range. I mean I can have 83XX extension in Asterisk and the CS1000S the same time? thanks

ok, thanks i will check the CDP

hi, guys thanks for time and help i have one CS1000S connect to Asterisk using T1 in the CS1000S i have the next numbering plan extension 8345 extension 4811 in the asterisk i have thex next numbering plan extension 8355 extension 4839 from asterisk to cs1000s i can make a call calling to...

ok, thanks for your time and help!

Hi, guys thans for time and help i have a question how i can send the extension name from CS1000S to Asterisk using PRI T1 Interconections? this is my DCH Print out i test ND1 and ND2 ADAN DCH 21 CTYP TMDI MG_CARD 000 0 04 PORT 1 DES pri USR PRI DCHL 23 OTBF 32 PARM...

ok, nice i set the Pub. OLI to 0000002222 and i can see now the number in the pstn side thanks for your time and help : )

ok, nice i set the Pub. OLI to 0000002222 and i can see now the number in the pstn side thanks for your time and help : )

may be something in the CS1000S some features? when user from bcm50 call to user of CS1000S exten to exten i can see the extension number of the user from BCM50 but when the user of bcm50 make a external call in the T1 PRI i can't see the exten user from the BCM50 somebody has any idea what...

and i want to send the BCM50 Extension ID to the Carrier the carrier need to see my BCM50 number 2222

ok, thanks for your time and help but means BTN??

Hi, thanks for your time and help all ready have the Pub. OLI Whit the same extension number for example: DN: 2222 Pub. Oli: 2222 Priv.Oli: 2222 but still does not work if the user dials from the BCM50 to the CS1000S i can see the extension number on my phone but when user use 9 + PHONE...

Hi, guys thanks for time and help. i have this configuration BCM50---->H323CHAN---->CS1000S---->(TELCO PSTN) The users on BCM50 use the CS1000S Lines for External Calls my question is how i can send the extension number id from BCM50 to PSTN? For example when extension 2222 hit 9 on the...