Recent content by AvayaPBXengineer

I use version 6 and it works fine on windows 7

what information have avaya provided you with ?

If you dont want to use val manager upload the files to the pub folder, then enable filexfer location xxx create login and password then from the pub folder ftp x.x.x.x (MGP address) login with login and password you created type bin put filename (this copies the file to the val board) On...

Its being released end of the year was originally due in August, requires CM6

verify button ??

download the firmware from Avaya support site. Upload the firmware to the s8300 and then copy the firmware from the pub folder to tftpboot Then do : show image version show boot bank – you upgrade the one which isn’t active copy tftp SW_imageA xxxxxxxx.bin xx.xx.xx.xx (LSP IP address) There...

have you connected a monitor onto the server when it boots up etc. I had an issue whereby the server would go through the bootup process and it would hang when it couldn't find an ntp server and subsequently reboot.

and when you do list surv from the mainsite do you see it registered ???

what version is the main site ????

can you ssh over from s8300 to s8730 ??

I managed to resolve it decided to upgrade to 5.2.1 and all ok.

Hi Wildcard I think its my formatting my private number entry has: ext len = 5 Ext Code= 3 Trunk group =1 Tptal Len =5 Thanks

Hi Am after some assistance, I have an s8300 with CMM. All is good apart from when calls goto coverage. I get the message about extension 00000 and call cant be transferred. I can call the hunt group fine and log into vm with no issues. But when I make a call the system isn't recognising...

Yes you need to connect to it via the console port. Follow the instructions: http://www.tek-tips.com/viewthread.cfm?qid=1060564&page=1 It will work on the G450

no more investigating bent pins :-)