Recent content by alphil

Trying to set up a global Call Pick Up Group with a one touch button programmed on each set so that any rining set can be answered. Seems like the programming will only allow for the user to kno which line is rining and then use the Intercom dila code to answer only that line. I would like to...

Installed a door phone it is working as programmed however when the door phone button is pushed there are two issues of concern. 1) The door phone only makes the Ding Dong sound once on all phones. Is is there any reason why it does not continue to ring like a normal incomming call? The staff...

If the Page Port is not working on a Partner II Proc. can I bypass it and connect the Page Amp. to an ext. port and then program the telephone sets to I*XX for to that ext. number which will activate the amplified paging system? Will this work or is there a better way to do this?

R3 I need to change the Held Call Timer time from 60 to 30 seconds but I can not locate the Feature code to do this.

This one may be 4.0. If so I will have to access COS via a PC?

I have a client who wants to change the sets ringers. Several agents are in the same area and they can not tell who's set is ringing because they all sound the same. With the Nortel sets there is about 3 or 4 settings to change the ringer sounds. Is this possible with a Partner ACS R3 and...

Thanks. I am considering using the Valcom 3002A. I see this unit has a power supply does that mean that I do not need to have powered speakers and that I can just run two conductors to each speaker or in series from speaker to speaker if I am using jsut one of the zones? I am looking at these...

Is there not a Page Output on port 15 Bk/Sl that I would connect to lets say the Valcom 2003 input? Isn't this the port that activates when a Speakers page is requested?

THe Plant area is very noisy this is a dry cleaning plant with a lot of noise and trucks in and out all day and night. I assume that I would just connect the Amp to the pae port?

By the way were would I find the COS for Record A Call. I checked under the FAQ in this site and I could not find the COS for Redord A Call.

I went into VM via 983 and PW then pressed Mailbox then pressed 1 and nothing happens. Do you mean to enter a mailbox number then NEXT til I see "Service Class"?

What would be the best to use for amplified paging with a Nortel Mics. I need to hook up 10 horn speakers and 6 ceiling speakers with about 3 zones. Should I look at Valcom or Bogan? Which one is easy to install and maintain and has a good loing life for indoor and outdoor? Is there a good...

I was told that the COS changes can only be made via a Laptop interface direct cable connection to the NAM itself. I was told that the Record a call option first has to be enabled within the NAM that it is locked and must be enabled but only via the above routine via a Laptop. Is this ture?

Will this delivery a back lit display as with for example a Partner 18D. These sets requite a 2 pair.

How many pair for a statnard set?