Recent content by 7740090

Can you WR memory on the switch. I had a issue like this before. Were I could not see the running config, but I also could not write memory. It was a software bug. My fix was new version.

Are the two routers PTP? Is voice the only thing going over the leased line? If the two routers are connection via PTP they need to be on the same network. Also if you are running data and voice of the leased line you will need some form of Oos.

Currently I have a ASA 5510 with one outside interface. All my internet traffic goes out this interface plus I have static nat translation to internal servers. Also my vpn clients connect to this outside interface. I have recently added another ISP connection to my location. I want to use this...

Just ports with the Phones

When I have a power outage. The power comes back on then switchports that have devices in use do not work. I can change the port that it is connected to and it works. After about 10 mins I can plug the device back into the port that did not work and it will be working again. Is this something to...

New in CUCM. Can anyone tell me were in callmanager can I find my receive digits for my incoming Pri. The Pri is coming in on a Mgcp gateway if the PSTN were sending me 7 digits where would I tell the callmanager that is whats happing.

Having trouble getting nexus 5000 series to authenticate with radius server. I have done other switches in the past but the nexus seems a bit different. Here is what my config looks like. Here is a config on a working non nexus switch aaa new-model aaa group server radius ias-local server...

Thanks for all the info. Finally got it working by turning off cdp on the switchports the phones were connecting to.

We are using 4500 switches we have tried all lldp configs how do you get the shoretel phones to work with LLDP-MED. WE are having probelms with the power consumed.The switch shows that it is using 15.4 watts, but the documentation from shoretel says the phone only uses 7.1watts. Does anyone know...

The cisco router has ip helper configured for the voice vlan.

Here is some more info on the probelm. My probelm is that the shoretel phones will not come up unless I hard code the mgcp voice switch that needs to controll it in the phone. If I do not hard code it it will get the correct ip from the voice Vlan but it will not come up. I have a dchp...

Hello, My probelm is that the shoretel phones will not come up unless I hard code the mgcp voice switch that needs to controll it in the phone. If I do not hard code it it will get the correct ip from the voice Vlan but it will not come up. I have a dchp server configured with option 156. and...

I have a shoretel phone going to a cisco switch. The only Vlan on the this switch is the voice vlan. should I set my switchport mode to trunk or access for the shortel phone.

Just loaded new Ios going to let in run for a week or two and see what happens .

I can not figure out what is causing my probelm.I have an 1861 Intergrated Services Router, running 7.1 Cisco Unified Communications Manager Express, My Ios is Version 12.4(11r)XW3.This Router is tied back to a 2851 which is my gateway back to a Nortel option switch, Via Metro Ethernet. My...