Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by 19041984
-
NEC 2000 IPS
Hi guys I've solved my problem with analog modem on MP Card ( 2000 IPS) i changed cm>4013>1>1 ( it was set on 0) The item is "DRS signal sent to terminal" 0 is = low level Now it response e make handshaking. Tank's a lot everyone. Bon- 19041984
- Post #10
- Forum: NEC: PBX solutions
-
NEC 2000 IPS
Tanks guys I refer to INTERNAL modem and 4011>1> is set to 7 Why in default configuration it works normally? There's something wrong in my configuration database,but what?- 19041984
- Post #9
- Forum: NEC: PBX solutions
-
NEC 2000 IPS
Hi Ozzie I use ISDN line only,but with Pstn line is the same. When i monitoring an incaming call ( with ISDN analyzer) i receive the "connect" but it doesn't make handshaking. In default configuration it works correctly,maybe there's wrong into programming database. Thank a lot- 19041984
- Post #3
- Forum: NEC: PBX solutions
-
NEC 2000 IPS
I've a problem with analog modem on MP (RS1 Port) It responding to an incoming call but it doesn't make handshaking. It's mute. I setup modem like above intrusion but not successful. 1307>xxx>0 4010> port 1> a valid extension.. Jump 4 switch is ON I've many Pabx in Italy with same problems,i...- 19041984
- Thread
- Replies: 9
- Forum: NEC: PBX solutions
