MICS 7.0 Locking Up - EVT181

shoeshiner · Jan 6, 2012

I have an MICS 7.0 and keeps locking up. Time is Displayed but no buttons work on any sets. Warm Start returns system functioning with the time at when the system locked up. System will lock up again between 1 to 3 hours it seems. I have never seen this before. I checked the system log and have 181 S7 which is - The DSP download failed during system initialization.

Other recent codes in attached notepad file.

Any Advice is appreciated. Thank you.

curlycord · Jan 6, 2012

Nothing attached.

Sounds like a tough one and could be anything from NVRAM to KSU to corrupt software.

=----(((((((((()----=
curlycord

http://www.curlycord.com

exsmogger · Jan 6, 2012

If the NVRAM is a Release 01, I'd start with changing it to a Release 02.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

shoeshiner · Jan 10, 2012

Ok guys, thank you for the replies. I did try to attach a file howerever it took my to a third party site and I didnt follow thru.

Here is the latest. I powered down the system and re seated all of the cards and pushed in on the NVRAM Module as well. I actually feel as though that module went in more. In any case the system is stable now. I erased the logs and no longer see the EVT181. I think we are in good shape now.

Thanks again!

Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

MICS 7.0 Locking Up - EVT181

shoeshiner

Programmer

curlycord

Programmer

exsmogger

Vendor

shoeshiner

Programmer

Similar threads

Part and Inventory Search

Sponsor