Yealink T19P E2. How to add pause to speed dial?

[Gigses]

I have IP phone Yealink T19P E2. I need add new contact to local directory for speed dial. Contact number consists of two parts: general number (9,8,4722604003) and additional (120). Between them I need to add a pause of 1.5 - 2 seconds. I put three commas in this place:

On the phone it looks like this:

But when dialing, commas are ignored and only the first part of the number is dialed:

How to add a pause to speed dial on Yealink T19P E2?
Thanks!

 

[curlycord]

The way I see it is you need to use a command for this.

Command

$C - Beginning of command
$ - End of command
wc = Wait Connect (in my land and yours we call it "Pause")
wp = wait time (Pause time) - you enter the seconds required after - wp2 (for 2 seconds)
$Cwc$Cp2$ = Wait command followed by the wait/pause time

9$Cwc$Cp2$8$Cwc$Cp2$4722604003$Cwc$Cp6$120

Yes, most systems probably use a comma or a P or #
Nothing like a user friendly phone eh?





________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[Gigses]

Yes, I saw manual for Yealink T46G. But Yealink T19P E2 not have line keys. I'm trying to set up a speed dial from a contact list on a directory page:

Symbols P and # do not work.

 

[curlycord]

Yes I am aware of that but I am assuming it would be the same command be it via set or web no? did you try it?

________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[curlycord]

I just read in the Yealink forum that it is not supported via phone book/directory, only to a DSS key which I guess is the larger sets.



________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[Gigses]

did you try it?

Yes, I try it. Did not work

I just read in the Yealink forum that it is not supported via phone book/directory, only to a DSS key which I guess is the larger sets.

It's a pity!