Xtal Dev edtion problem hope this is the right forum

[Tailgun]

I have been using VB6 Enterprise along with Crystal 8.5 Dev edition the computer also has the 8.5 Enterprise on it. I have used it for a long time with no problem but all of the sudden when I load my VB6 application it tells me xqviewer.dll can't be loaded into my VB6 program. It has something to do with the ActiveX viewer since when I compile my VB6 I get errors with the viewer. the dll is registered I have checked it many times so that isn't the problem.

Hopefully someone will have an answer I really need to solve this problem.

Thanks for any and all help.

 

[tomk01]

have you checked to see if vb6 has a new patch that would effect that .dll?

 

[Tailgun]

I probably need to also say I have the complete setup on another computer and it works fine (cross my fingers) I don't know why it happened on this computer which BTW is my main dev computer. But if the other computer all of the sudden does the same thing I'm dead because the application will no longer show the reports after VB6 compiles it. So as a temp fix I modify the program on the computer with the problem then transfer it to the other to compile it.

 

[Tailgun]

BTW should I put this in another forum? I just need some help but don't want to post in the wrong forum

 

[vidru]

You could also try the Crystal Enterprise forum: forum782.

-dave