I am using XP pro and have been connected to the network for quite some time....recently, my connection slowed to a mere crawl. We tested the hub, cables, and the card...all seemed ok. I decided that maybe it was the Lan card and replaced it with a Netgear ethernet card, assuming that the XP drivers would be the difference. I could get a connection unless.....I enabled the onboard Ethernet card, Plugged in the old Ethernet card and.....Installed the New NETGEAR card with the Network cable running from it.
Connection is there, but I don't reallt like 3 ethernet cards on my computer.... I finally disabled the onboard, Removed the old Ethernet and configured the NETGEAR, but again...the connection is crawling....
Does anyone have any idea what I should do from here?
I've switched systems and the other computer accesses the network just fine...it has to be in this XP machine.
Thanks in advance!!!!
Connection is there, but I don't reallt like 3 ethernet cards on my computer.... I finally disabled the onboard, Removed the old Ethernet and configured the NETGEAR, but again...the connection is crawling....
Does anyone have any idea what I should do from here?
I've switched systems and the other computer accesses the network just fine...it has to be in this XP machine.
Thanks in advance!!!!