Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
XP in boot loop???
- Thread starter cbailey
- Start date
creechurch
IS-IT--Management
Ok first thing to try is to.
Reboot pc, press the F8 key and choose "Last Known Good Config"
If no joy then, same again (F8) boot to safe mode.
If still no joy then.... using the Windows XP CD, use that to boot to recovery console, using the repair option.
One of these should at least do something.
Reboot pc, press the F8 key and choose "Last Known Good Config"
If no joy then, same again (F8) boot to safe mode.
If still no joy then.... using the Windows XP CD, use that to boot to recovery console, using the repair option.
One of these should at least do something.
- Thread starter
- #3
I got to the recovery console, but cant find any infor on how to use it. I'm at a C: but standard DOS commands don't work. Can anyone point me to a link the talks about this?
The PC will only boot from the CD. Choosing any other mode caused the PC to loop.
How do you use the recovery console?
The PC will only boot from the CD. Choosing any other mode caused the PC to loop.
How do you use the recovery console?
Here are some commands for C:.
Bootcfg -View your boot loader settings, such as the default OS and the selection timeout, as well as boot entries and load options.
Diskpart - Manages the disk partitions. After you type "diskpart" into your command prompt, your prompt will become "DISKPART." Type a question mark to get a list of possible arguments. Type exit to leave diskpart.
Driverquery –This will get you a nice list of your drivers and their properties.
Fsutil – Here’s a handy command. You can do everything from managing your hardlinks to querying the free space in a volume. Type "fsutil" into your command prompt, and you'll see a list of options. I choose "fsinfo" from the list, so I type "fsutil fsinfo" into the prompt. Now I get even more options, but I choose drives by typing "fsutil fsinfo drives." It's fun, it's easy, and you'll get the hang of it. Explore this utility. There are a lot of cool features and hidden twists.
Getmac - This gets the MAC (Media Access Control) address.
Gpresult - Get the RSoP, user settings, and computer group policy settings. (RsoP is a utility to monitor and organize network group policies. It stands for Resultant Set of Policy).
Helpctr - Starts the Help and Support Center.
Ipseccmd - Configures Internet protocol security (IPSec) policies in the directory service or in a local or remote Registry. Ipseccmd is a command-line version of the IP Security Policies snap-in for the Microsoft Management Console (MMC).
Netsh - A network configuration tool. Type "netsh" to enter the tool, or "netsh /?" to learn more about it. To exit this tool, type "exit" at the"netsh>" prompt.
Openfiles - Allows an administrator to display or disconnect open files in XP professional. Type "openfiles /?" for a list of possible parameters.
Pagefileconfig - Displays and configures the paging file Virtual Memory settings of a system.
Prncnfg - Configures or displays configuration information about a printer.
Prnjobs - Pauses, resumes, cancels, and lists print jobs.
Recover - This command attempts to recover readable information from a damaged disk. Type "recover" to get the syntax.
Reg - The console registry tool. Get syntax help when you type "reg" into the prompt. You can export the registry, copy, restore, compare, and more.
Schtasks - The administrator can schedule, run, change, or delete tasks on a local or remote machine. Type "schtasks /?" (without the quotes) for a list of options.
Sfc - The system file checker scans protected system files and if you (or your applications) have hacked any beyond repair, it will replace them with the real, official Microsoft versions. Type "sfc" into the command prompt to get a list of options.
Shutdown - You can shut down or restart your own computer, or an administrator can shut down or restart a remote computer. Type "shutdown" into your command prompt to see a list of possible arguments.
Systeminfo - Basic system configuration information, such as the system type, the processor type, your time zone, your virtual memory settings, and much more.
Tasklist - Want to know what's going on behind the scenes? Type "tasklist" into the command prompt, and get a list of current processes.
Taskkill - Now that you know what's going on behind the scenes, maybe you want to shut a few of these extraneous tasks down. That's where taskkill comes in. Type "taskkill /?" for a quick lesson in the syntax of the command, then shut down all those random processes. I just killed my MS messenger by typing "taskkill /PID 1680." I got the PID (product identification) by running tasklist, above.
Typeperf - Writes performance-counter data to the command window or to a supported log file format.
Bootcfg -View your boot loader settings, such as the default OS and the selection timeout, as well as boot entries and load options.
Diskpart - Manages the disk partitions. After you type "diskpart" into your command prompt, your prompt will become "DISKPART." Type a question mark to get a list of possible arguments. Type exit to leave diskpart.
Driverquery –This will get you a nice list of your drivers and their properties.
Fsutil – Here’s a handy command. You can do everything from managing your hardlinks to querying the free space in a volume. Type "fsutil" into your command prompt, and you'll see a list of options. I choose "fsinfo" from the list, so I type "fsutil fsinfo" into the prompt. Now I get even more options, but I choose drives by typing "fsutil fsinfo drives." It's fun, it's easy, and you'll get the hang of it. Explore this utility. There are a lot of cool features and hidden twists.
Getmac - This gets the MAC (Media Access Control) address.
Gpresult - Get the RSoP, user settings, and computer group policy settings. (RsoP is a utility to monitor and organize network group policies. It stands for Resultant Set of Policy).
Helpctr - Starts the Help and Support Center.
Ipseccmd - Configures Internet protocol security (IPSec) policies in the directory service or in a local or remote Registry. Ipseccmd is a command-line version of the IP Security Policies snap-in for the Microsoft Management Console (MMC).
Netsh - A network configuration tool. Type "netsh" to enter the tool, or "netsh /?" to learn more about it. To exit this tool, type "exit" at the"netsh>" prompt.
Openfiles - Allows an administrator to display or disconnect open files in XP professional. Type "openfiles /?" for a list of possible parameters.
Pagefileconfig - Displays and configures the paging file Virtual Memory settings of a system.
Prncnfg - Configures or displays configuration information about a printer.
Prnjobs - Pauses, resumes, cancels, and lists print jobs.
Recover - This command attempts to recover readable information from a damaged disk. Type "recover" to get the syntax.
Reg - The console registry tool. Get syntax help when you type "reg" into the prompt. You can export the registry, copy, restore, compare, and more.
Schtasks - The administrator can schedule, run, change, or delete tasks on a local or remote machine. Type "schtasks /?" (without the quotes) for a list of options.
Sfc - The system file checker scans protected system files and if you (or your applications) have hacked any beyond repair, it will replace them with the real, official Microsoft versions. Type "sfc" into the command prompt to get a list of options.
Shutdown - You can shut down or restart your own computer, or an administrator can shut down or restart a remote computer. Type "shutdown" into your command prompt to see a list of possible arguments.
Systeminfo - Basic system configuration information, such as the system type, the processor type, your time zone, your virtual memory settings, and much more.
Tasklist - Want to know what's going on behind the scenes? Type "tasklist" into the command prompt, and get a list of current processes.
Taskkill - Now that you know what's going on behind the scenes, maybe you want to shut a few of these extraneous tasks down. That's where taskkill comes in. Type "taskkill /?" for a quick lesson in the syntax of the command, then shut down all those random processes. I just killed my MS messenger by typing "taskkill /PID 1680." I got the PID (product identification) by running tasklist, above.
Typeperf - Writes performance-counter data to the command window or to a supported log file format.
The only thing that might help in Recovery Console is to revert the registry.
The MS guide:
A more plain English version of the above:
- Thread starter
- #6
- Status
Similar threads