xHarbour under Linux

[Msilver2]

I try to make some tests with xHarbour on Linux.
I made a lib file and I try to make an executable linking with my lib file.

My project file looks like this:

CINI =
C_OUTPUTFOLDER =
DEFFILE =
INCLUDEFOLDERS =
LAUTORUN =
LDEBUG = .F.
LGUI = .F.
LIBFOLDERS =
LMT = .F.
LPRG_CLASSICDEBUG = .F.
LPRG_DEBUG = .F.
LUSEDLL = .F.
MAPFILE =
MYC_FLAGS =
MYDEFINES =
MYLINK_FLAGS =
MYPRG_FLAGS =
MYRC_FLAGS =
MYSLY_FLAGS =
OUTPUTFOLDER =
PRG_OUTPUTFOLDER =
RC_OUTPUTFOLDER =
RUNARGUMENTS =
SLY_OUTPUTFOLDER =
TARGETFOLDER =

[2LAN.prg]
MYC_FLAGS =
MYDEFINES =
MYPRG_FLAGS =

[hlib.lib]

but it does not work, generates this log file:

Type: C >>>xblnk -L/usr/lib/xbuilder -Wl,--noinhibit-exec -static -gtcrs -L "/usr/lib/xbuilder" -L "/usr/lib" "2LAN.o" -lh. -lpthread -lgpm -lncurses -lm -lslang -o"2LAN"<<<

/usr/bin/ld: cannot find -lh.
collect2: ld returned 1 exit status

Type: C >>>Couldn't build: 2LAN<<<

Have anybody idea what is wrong with my project ?

 

[TonHu]

It's quite obvious you are missing the library called h (-lh. parameter)
Did you make this script using HBMake? then you probably added this as an extra lib parameter, you'd better take that parameter out, and re-try.

Best xharbour support is to be found at nntp://news.xharbour.org (free access to most groups) where your best bet would be the 'xHarbour' group :-D

HTH
TonHu

 

[Msilver2]

I made this project with xbuild, and I do not have any "h" library, so I did not missed it, xbuid put it on my project (so in my command line), and I don't know why ?!

If I try to execute the command:
xblnk -L/usr/lib/xbuilder -Wl,--noinhibit-exec -static -gtcrs -L "/usr/lib/xbuilder" -L "/usr/lib" "2LAN.o" -lh. -lpthread -lgpm -lncurses -lm -lslang -o"2LAN"

from the console, there is an other error:
strip: './2LAN': No such file

I took this command from the log file.

I have no idea wat's happen.