XFCOT CARD CONFIG

[nutek10]

Hi All,

I am using a XFCOT NTAG46AA card, and need to config it.

I am not sure of what info to place for the following:
ROUT (what is a Route #)
ACOD (What is Trunk Route Access Code)
XTDT (Is it good to use Extended Dial Tone Detector)

Thanks for your help.

 

[johnpoole]

you'll need to build a rdb in load 16 (route data block) the questions are pretty simple, just fill in the blanks for trunk type etc. then at the rtmb in trunk program you'll need to enter x 1 with x=to the new route number.. all trunks in a group that are used for a common purpose are assigned to the same route.. acod is access code and just use a 4 digit vacant number outof your did range for that, it will only be used for testing or advanced routing and i have never answered the XTDT prompt

john poole
bellsouth business
columbia,sc

 

[nutek10]

Thank you John Poole.