Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Xerox Phaser 6125 - Slight Squeking Noise

Status
Not open for further replies.

Amphidamas

IS-IT--Management
Nov 16, 2007
4
Hello everybody, :)

I have just bought an Xerox Phaser 6125 and when it's operational it seems to make a slight squeaking noise. Is this normal as it is only one day old?

Thanks in advance!

Regards.
 
When it's operational" Hah! Developers can be a bit tight when new. Ensure the unit is seated, it may be a bad one.
Run a supplies status page.

"Impatience will reward you with dissatisfaction" RMS Cosmics'97
 
No printer should squeak, especially right out of the box. In taking one step further than Michael, a number of consumables could be causing the squeak including one of the toner cartridges, fuser or transfer roller. Unfortunately the only way I know to check is to repace 1 consumable at a time until the squeak goes away.

Helping people get the most from their printers and copiers
Ryan Perry, Owner
go2printgreen.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top