Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Xerox 6250dp Install Imaging Unit Error 3

Status
Not open for further replies.

quas34

Technical User
Oct 17, 2005
5
US
I keep getting the install imaging unit error depite buying a new one and correctly installing it. Any suggestions?
 
My first question is how good are you with tools? The problem you have is caused by the V rack assembly out of position. If you want to put it back I'll give you the directions, it's not hard, but I don't want get you in over your head. Later
 
Thanks for the suggestion, that was the error and I took the side panel off and realigned the gears. No problem with that and its up and working great!
 
I may have the same problem with a Xerox 6200, where is the V assembly and how do you re-align it?
 
Hello, I'm currently dealing with this same issue.
I'm very handy with tools and am not afraid to make any adjustments, do any needed dissassembly etc, but would very much appreciate any details that my be provided as to what to look for to verify that the V rack is the issue, and the proceedure for makeing the needed adjustment.

Thanks in advance.
 
Take the left side cover off and look for a big white gear.

Before removing it note the orientation of the white vertical strait gear behind it.

Open the IU cover all the way. Remove the big gear and push the noted gear as far up as you can. Put the big gear back on.

Put the side cover back on and print away.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top