When the POST Testing * appears you can hit the space bar to access the switch Bootrom. From there I would suggest that you change the config to secondary and then enter boot to boot the box off the secondary configuration. Looks like your primary configuration could be corrupt.
See if you can at least break into the BootRom first. If you need the exact commands let me know here in this post.
I think its something like this, I can get you the exact commands if needed:
Sorry for the delay. Changed corporate domains, moved offices and reloaded my priorities.
When I boot the switch there is no chance to break the POST. I've looked around on the chasis and don't see any type of RESET. Is there anyway to reset this to factory default, or fail over to the alternate boot bank without going through CLI?
From the instant this thing boots it goes into insanity mode. It's still sitting on a shelf in the back room just in case someone comes up with a good idea.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.