Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

x450a cyclic reboot

Status
Not open for further replies.

nethell

Technical User
Sep 11, 2002
30
AZ
Hi

We have just powered up 2 Extreme x450a switches...
But we can not log on to console because of cycling reboot all the time. And here we have the logs:

Summit X *
Version 1.0.3.5 Branch trunk by release-manager on Mon 06/30/08
Copyright 2003-2007, Extreme Networks, Inc.

Press and hold the <spacebar> to enter the bootstrap.
Starting Default Bootloader ...


Extreme Networks


Running POST... PASSED
Version 1.0.3.5 Branch trunk by release-manager on Mon 06/30/08
Copyright 2003-2007, Extreme Networks, Inc.

Press and hold the <spacebar> to enter the bootrom.

Loading EXOS Image ...|
Running Image ...
Starting ExtremeXOS 12.0.3b16
Copyright (C) 1996-2008 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,017,082; 7,046,665; 7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861.
insmod: init_module: linux-kernel-bde: No such device
Failed to open /dev/exosVlan (No such device)
****************************************************
EPM: can not install module exvlan going for reboot
****************************************************
############################## ASSERTION FAILURE ###############################
epm: epm.c:4886: epmReadProcDir(): REASON: pcb->argc > 0
################################################################################
epm: epm.c:4886: epmReadProcDir: Assertion `pcb->argc > 0' failed.
Starting ExtremeXOS 12.0.3b16
Copyright (C) 1996-2008 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,017,082; 7,046,665; 7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861.
insmod: A module named aspenpmap already exists
insmod: A module named watchdog already exists
insmod: init_module: linux-kernel-bde: No such device
insmod: A module named linux-uk-proxy already exists
insmod: A module named exosq already exists
insmod: A module named exosmailbox already exists
insmod: A module named nettx already exists
insmod: A module named exosipv6 already exists
insmod: A module named exdhcpsnoop already exists
Failed to open /dev/exosVlan (No such device)
****************************************************
EPM: can not install module exvlan going for reboot
****************************************************
Error: Failed to connect CLI for 121 seconds!
############################## ASSERTION FAILURE ###############################
epm: epm.c:4886: epmReadProcDir(): REASON: pcb->argc > 0
################################################################################
epm: epm.c:4886: epmReadProcDir: Assertion `pcb->argc > 0' failed.
Starting ExtremeXOS 12.0.3b16
Copyright (C) 1996-2008 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388; 6,034,957; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550; 6,981,174; 7,003,705; 7,017,082; 7,046,665; 7,126,923; 7,142,509; 7,149,217; 7,152,124; 7,154,861.
insmod: A module named aspenpmap already exists
insmod: A module named watchdog already exists
insmod: init_module: linux-kernel-bde: No such device
insmod: A module named linux-uk-proxy already exists
insmod: A module named exosq already exists
insmod: A module named exosmailbox already exists
insmod: A module named nettx already exists
insmod: A module named exosipv6 already exists
insmod: A module named exdhcpsnoop already exists
Failed to open /dev/exosVlan (No such device)
****************************************************
EPM: can not install module exvlan going for reboot
****************************************************
Error: Failed to connect CLI for 122 seconds!
############################## ASSERTION FAILURE ###############################
epm: epm.c:4886: epmReadProcDir(): REASON: pcb->argc > 0
################################################################################
epm: epm.c:4886: epmReadProcDir: Assertion `pcb->argc > 0' failed.
*****
***** ERROR: looping during EXOS startup -- rebooting system
*****
Sending SIGKILL to all processes.
Please stand by while rebooting the system.



Any help very appretiated

Nethell
 
Have you gotten in to the switches at all? If not I would return them as DOA.
 
Repeatedly hold down the space bar when you get see Running POST... from the Console Port using a terminal emulator such as TeraTerm in order to access the BootRom> prompt. Try using the command "boot 2" in order to try booting the switch using the secondary (2) software image bank instead of the primary (1). You can also try booting from am empty configuration file by breaking back into the BootRom> if selecting secondary bank does not work by using "config bogus" The word bogus can be any word. It's just a ficticious config file name. The switch will basically launch a factory default config file because it cannot locate a real configuration file called bogus.

Suggest new software and bootrom. 12.0.3.16 is a little old considering they are up to 12.4 now and bootrom 1.0.5.5.

Let me know if either method works. If not, you may have to return them to Extreme for repair. But let me know either way.

Regards - Fush~

Evil will always triumph, because good is dumb.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top