WSS 2382 set up scenario

[orangepeel]

I have a WSS 2382 on a flat network. I have a wireless VLAN on each of the 2 interfaces with some AP's on each wireless VLAN. I want to keep the wireless VLANS segregated from the wired LAN. I have a service profile on each VLAN and the users connect WPA with a passphrase. I would like to have one wireless VLAN authenticate via active directory. The other wireless VLAN authenticate via SQL. SQL server and AD are on the wired LAN and I would think that I can place the radius server on the wired VLAN. Could I do this with one radius server if I set up one or two Web-Portal Services on the 2382? With the Web-Portal service can I have an HTML page that will be used to logon for each Web-portal service? Can I customize this HTML page?

 

[JeroeNortel]

Hi,

If I understand you correctly you should do the following:

configure 2 VLAN's (you've already configured as mentioned)
add the specific port to the specific VLAN
configure 2 radio profiles
configure 2 wireless service profiles (2 SSID's)
set fall through access to 'web-portal'
configure your encryption settings (you've already configured as mentioned)
configure authorization atributes (specify specific VLAN)
configure web portal (acl and login page)
add specific radio profile
configure web access rule(s)
configure RADIUS (you've already configured as mentioned)
generate web keys through cli (private certificate)
place the specific login page in the correct folder

Those are the things you'll need to configure and get the resulat as requested. You should check the manual(s) for the specific configuration commands.

Goodluck!