Wrong time on 9600 phones

[wwmarcww]

I have a client that has a s8700 with the 9600 phone sets.

The issue is, the time CM is set to is correct, however the time displayed on the 9600 set is an hour fast. I checked the 46xx settings file, but the only DST setting in there is for SIP phones. I am 100% sure these are not SIP phones. Any ideas on where else the phones could be pulling the time from?

 

[ronfitz1]

Did you check your daylight savings rule in CM?

 

[Zen216]

under set time,,
check what rule your DST is using,,

set time Page 1 of 1
DATE AND TIME

DATE

Day of the Week: Tuesday Month: May
Day of the Month: 1 Year: 2007

TIME

Hour: 17 Minute: 33 Second: 17 Type: Daylight Savings

Daylight Savings Rule: 1

under cha locations
also see what rule is being used

change locations Page 1 of 16
LOCATIONS

ARS Prefix 1 Required For 10-Digit NANP Calls? n

Loc. Name Timezone Rule NPA ARS Attd Pre- Proxy Sel.
No. Offset FAC FAC fix Rte. Pat.
1: Main + 00:00 1 413


they both should be the same as the rule # that is set in
cha day

change daylight-savings-rules Page 1 of 2
DAYLIGHT SAVINGS RULES

Rule Change Day Month Date Time Increment

0: No Daylight Savings

1: Start: first Sunday on or after March 8 at 02:00 01:00
Stop: first Sunday on or after November 1 at 02:00