Wrong processdrive adjustment??

[frimu]

Phaser 8400. If the other wheels in the processdrive gearbox are all exact on the mark position the markposition of the wheel mostly positioned at ground lever is not on the half 6 position but 1 tooth to the right. Is that wrong? should I change that and how to do??
thanks for your help. frimu

 

[DocJams]

Yes, that is wrong. That gear is for the maintenance cam, and it is picky on placement. Simply pull out the process gear assembly with a paper clip holding the other 2 gears in home position. Rotate the cam gear to put it in home position. Reinstall the process gear assembly. Smile at your success.