FDproductions
Vendor
Does anybody know if the new 6120 and 6140 IP WLan phones work with the BCM50 any version?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wlan Handsets and BCM
- Thread starter FDproductions
- Start date
- Status
SupportDude
Technical User
They do work on bcm50 2.0 and up(should work on 1.0 but i never tried). They emulates I2004 but as SupportDude said not supported by Nortel. When Nortel says "not supported" that means it's probably working but they don't want to troubleshoot in case you have issues with them...
SupportDude
Technical User
Agreed gberger!
What is really means is you're going to be baning your head on the wall by yourself.![[shadeshappy]](/data/assets/smilies/shadeshappy.gif "[shadeshappy] [shadeshappy]")
-SD-
What is really means is you're going to be baning your head on the wall by yourself.
-SD-
SupportDude
Technical User
I stand corrected.
I was looking at the BCM Compatibility docs, not the 6100 series docs.
Looks like they've been supported for a few months now.
Thanks for the info!!
I did notice in the release notes that the sets may not have the proper firmware installed at the factory. You may need to update to 115.016 or better.
-SD-
I was looking at the BCM Compatibility docs, not the 6100 series docs.
Looks like they've been supported for a few months now.
Thanks for the info!!
I did notice in the release notes that the sets may not have the proper firmware installed at the factory. You may need to update to 115.016 or better.
-SD-
- Thread starter
- #7
FDproductions
Vendor
Thanks for all the info guys. I appreciate it.
- Status
Similar threads
- Question