Hello everyone,
I have recently installed a new Witness ContactStore system with a 145GB hard disk. We are monitoring 30 agents using G.729. Initial tests were OK. The "/calls" & "/var" partitions are OK. From the moment we started using the system we noticed that the "/" partition fills up very quickly (within 24 hours). A reboot drops the occupied space on this partition from 100% to 75%.
Does anybody know how the system uses the "/" partition ? I have searched every document available on the Avaya support site but found nothing specific on this..
Any help would be appreciated.
Regards,
Petran
Petran.
I have recently installed a new Witness ContactStore system with a 145GB hard disk. We are monitoring 30 agents using G.729. Initial tests were OK. The "/calls" & "/var" partitions are OK. From the moment we started using the system we noticed that the "/" partition fills up very quickly (within 24 hours). A reboot drops the occupied space on this partition from 100% to 75%.
Does anybody know how the system uses the "/" partition ? I have searched every document available on the Avaya support site but found nothing specific on this..
Any help would be appreciated.
Regards,
Petran
Petran.