I have configured my new benq wirelss router for pppoe account.setting everything ok & LAN connection shows status connected , send & receive bytes updating but i can't connect to internet. Iam using Windows XP.Your help is higly appreciated
So, webpages won't load in your browser, is that it? From the sound of it, seems like you have no problem getting logged into your router and viewing the configuration screen. That at least means your physical connection is fine and Windows can see it.
Open up a command prompt (Start -> Run and type cmd). Try pinging any website by typing something like this: ping www.yahoo.com
After hitting enter, it should return some results indicating packet loss at 0%. If any error messages appear, post back. If you do get the results fine, then most likely you have a browser problem. Let us know what you find...
~cdogg
[tab]"The secret to creativity is knowing how to hide your sources"
[tab][tab]- A. Einstein
Hi yes i tried
i get message ping request can't find host
I have another question if the pppoe connection give in the router then the connection would be always on?
if i want to setup connection what option i chooes in XP
connection ie always on or that require user account pppoe
any how once i installed the router i think pppoe dialup will not work.
just a thought.
Your reply is highly appreciated
In XP you may want to click on your network connection and see if the firewall is on or not and if you are allowing certian services like HTTP for web browsing.
If you do not like my post feel free to point out your opinion or my errors.
I find, more often than not, that most users forget that surfing the internet by domain name requires the use of a valid domain name server to resolve internet names to IP addresses.
Make sure your router has the correct DNS entry. If not, then you cannot surf the internet by domain name. You can, however, surf by IP address.
Hi
Its not problem with DNS Server
I have figured out the problem Lan connection was previously connfigured to pppoe network adapter.
I removed that & created new connection it works fine.
Thank you all for your support
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.