I am having a problem on our network where the AP (2330A) is configured to use a specific channel, but when I use the monitor tool in our WMS it shows to be on a different channel. I have looked in the radio profile module and don't see anything there that would cause this. Is there somewhere else I need to check or is this normal?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Wireless LAN channel issues 1
- Thread starter atascoman
- Start date
-
1
- #2
JeroeNortel
Technical User
You should check wether or not 'tune channel' is enabled. If so the WSS will automatically adjust these settings regardless of your manually configured setting.
If channel tuning is enabled you should notice channel changes inyour log file.
You can change this setting in the specific radio profile.
If channel tuning is enabled you should notice channel changes inyour log file.
You can change this setting in the specific radio profile.
- Status
Similar threads