Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

wire bnc network

Status
Not open for further replies.

macazu

Programmer
Nov 13, 2005
19
FR
Hello
I have old RS6000 (320h) and when I plug the wire with BNC
to the hub the connexion not work I must plug AUI with tranciver (the network card is old MCA slot) it is possible to plug directly BNC to BNC ???
Thanks
 
I believe in smit devices comm devices you can change the network interface on those type cards from BNC to DIX. I guess yours is set to DIX.

If you want to go BNC, needs a carefully constructed cable with 50 ohm terminator on each end but I guess you know about that.

DIX=Digital-Intel-Xerox


HTH,

p5wizard
 
Thanks
With dix bnc NA and tp it is same I must plug tranciver
probably old card have strap option ??? or wire is 70 ohm with same value terminator (green wire)
it is no probleme I have traciver and the share work I just want understand ICMP ping result ttl=150
Thank
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top