gargoyle47
Technical User
- Mar 7, 2005
- 78
Here is what I have
Fic Az11 motherboard.
Hitachi DVD model Gd2500 player
Hp 8100 cdr-rw writer
WinXP Pro with SP2(new install)
First both units are set to CS(Cable Select).
If I plug in the cdwriter as master then the dvd player is not seen.
However if I plug in the dvd play as master and cdwriter as slave then both uints are seen.
If I only plug in one unit to head connecto then that unit is seen. I have tryed both units as Master and both will work independently but not together.
Any idea as to what the problem is here? I did not think there was rule this must be plugged in first and this second.
Can anyone explain what is going on here.
Never Say Never (Romeo Void)
SeeYa
#1 Homebuilt Iwill KK266plus-r 1.0Ghz AMD Win98Se, DVD-rom, LG-cdwriter.
# Homebuilt FIC AZ11 900MHz AMD, daul boot Win98SE/ Fedora Core 2
Fic Az11 motherboard.
Hitachi DVD model Gd2500 player
Hp 8100 cdr-rw writer
WinXP Pro with SP2(new install)
First both units are set to CS(Cable Select).
If I plug in the cdwriter as master then the dvd player is not seen.
However if I plug in the dvd play as master and cdwriter as slave then both uints are seen.
If I only plug in one unit to head connecto then that unit is seen. I have tryed both units as Master and both will work independently but not together.
Any idea as to what the problem is here? I did not think there was rule this must be plugged in first and this second.
Can anyone explain what is going on here.
Never Say Never (Romeo Void)
SeeYa
#1 Homebuilt Iwill KK266plus-r 1.0Ghz AMD Win98Se, DVD-rom, LG-cdwriter.
# Homebuilt FIC AZ11 900MHz AMD, daul boot Win98SE/ Fedora Core 2