WINS configuration

[paul00]

Hello
When I want to make configuration Wins
must I remove netbeui protocol from clients Win95
Does such clients must automaticly logon into wins
database or I must add it.
Have i to use DHCP for win95 clients?

Thank you

 

[shahsbro]

hi,

If u r enable wins, i think win95 and win98 clients can use static IP b\c wins maintain a table of IP and netbios name of user PC's in a network. wins also stop broadcast.

thanks
shahs

 

[VenoMaverik]

Hiii... IMHO Having NetBEUI does not matter... Since you'll be using WINS the protocol employed will be TCP/IP anyway...

WINS Clients will automatically register themselves in the WINS database upon booting or whenever a WINS boots up...

As far as DHCP is concerned... thats completely optional... Using it will reduce your configurations part such as automatically configuring DNS, WINS, Gateways, IPs, etc... on the DHCP clients... But.. static IPs would do too..

Hope this helps...

Kind Regards
Maverik

 

[paul00]

hi,
thank you for comments
If I want to use Wins for W9.X clients
must I manually enter all non-Wins(W2k) machines(about 400
machines)
into static mappings
and it is nesesary to change every non-Wins(W2K)
registry Enable proxy?
When I am trying win9.x logon into domain
it does not let me.
even I instal win95.reg for win95 client
and manaually enter wins server ip

 

[paul00]

problem Windows 95/98 autentification
*THE DOMAI PASSWORD YOU SUPPLIED IS NOT CORRECT
OR ACCESS TO YOUR LOGON SERVER HAS BEEN DENIED*

i configured lmhots faile
wrote domain controler IP and Netbios name & domain
clear nbtstat -R and test nbtstat -c
its ok
i made client like B node
for local broadcast transmit
i wrote in to registry node type 0x1 thats B
it not helped
I instaled netbios server
and made M mode
An error leave same

Thank you