Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Windows Update cannot check for updates following using Portable Update Windows 7

Status
Not open for further replies.

12345DrDave

Technical User
Oct 1, 2012
7
GB
Hi
I have searched ahead of asking this question.
I have HP Intel I5 laptop running 64bit Windows 7 Home Premium. It has not been used for maybe 9 months. So I decided to get it's window updates and virus/spyware up to date offline.
I used an identical pc (except for I7 processor) to download the required software (this may be relevant).
I first installed a new Avast free offline version with no problems.
I then chose, after some reading, Portable Update (PU) (specified to update an existing installation) to transfer and install all the required Windows updates that had occurred since the pc was used, because the process can be very slow. This involved running the program on my operational pc and filling the program's cache with all updates, as instructed. I then ran the program on the target offline pc, leaving it at night. In the morning the computer was rebooted, and all initially appeared ok. The PU log reported a normal termination on both pc's.I connected the target pc to the internet. I can provide the PU log for both the Source and Target (same file appended) if required by any kind person!
However, I next decided to open Windows Update to check for any further updates that may have been missed, and to check that all was well. Windows Update opened With the red X in the "Check for updates for your computer box" with the button "Check for updates", so I pressed it. The report came back "Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer". I checked, and the service was running, so I restarted the pc and got the same result again. The Change Settings screen runs normally, the Update History does not populate at all, even after several minutes, and there are no Hidden Updates. Any assistance would be gratefully received.
I then searched for solutions. The only one that I felt I wanted to try without advice was the Windows update Troubleshooter (WUTS).
I ran it and it found two problems; "Problems installing recent updates - Not fixed" (the first time I ran the WUTS it reported that both issues we solved) and "Service registration is missing or corrupt - Fixed". However the WUTS detailed inf (like a log) gives the first problem a different title "Service registration is missing or corrupt" and logs it as fixed. So in the details, both issues are shown as resolved. I have run the WUTS several times to no avail, and rebooted. However the problem remains.
Please do allow me some time to reply if you post a reply, because my time schedule is a little stretched just now. Thank you in anticipation.
David ps I may as well attach the PU log...
 
 https://files.engineering.com/getfile.aspx?folder=1f4d289f-3010-4e53-ac00-c06a26f0bc11&file=PortUpSource_and_Target.log
Microsoft has released the latest update before resolving a number of outstanding issues. But at least they now provide a more centralized location for getting update information. The home page (dashboard) can be found here and the specific page for the latest update can be found here.

Adrian G,
Hosted QuickBooks Expert
 
Hi Adrian.
I do apologise for my late reply. I have been away.
I am grateful for your assistance.
The links you have sent me are most useful. However I've decided to move to Windows 10 and do a clean install. I think this one goes back to 2012.
Thanks again.
Kind regards.
David
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top