Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Windows NT Wireless
- Thread starter pkuck
- Start date
Well, quick search turned this one up:
It's only wireless b, but if you're talking Windows 95, I suppose that's of no concern. It's a PCMCIA (PC Card) slot, so your PC/laptop would have to support that.
If you want a better answer, be sure to give more specifics.
--
"If to err is human, then I must be some kind of human!" -Me
It's only wireless b, but if you're talking Windows 95, I suppose that's of no concern. It's a PCMCIA (PC Card) slot, so your PC/laptop would have to support that.
If you want a better answer, be sure to give more specifics.
--
"If to err is human, then I must be some kind of human!" -Me
If you can find the card for this one, this should work (PCI):
--
"If to err is human, then I must be some kind of human!" -Me
--
"If to err is human, then I must be some kind of human!" -Me
- Thread starter
- #4
I think I found what I need here.
Thanks for getting me on the right track.
Thanks for getting me on the right track.
No mention there of drivers for Win95 there, and from the Netgear website, it only appears to have XP drivers, which likely won't work in 95 or NT.
I'd start by looking at the manufacturers websites, such as Belkin, Netgear, etc.. and look for products that may have drivers for Legacy Windows versions.
Once you have a list of hardware that has drivers for it, you may be able to go out and buy them.
----------------------------------
Phil AKA Vacunita
----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.
I'd start by looking at the manufacturers websites, such as Belkin, Netgear, etc.. and look for products that may have drivers for Legacy Windows versions.
Once you have a list of hardware that has drivers for it, you may be able to go out and buy them.
----------------------------------
Phil AKA Vacunita
----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.
OH! sorry.
Never mind, I just read the entire description. It says it does support NT. Hopefully it has a floppy or CD with the drivers, because the Netgear page only has XP drivers apparently.
----------------------------------
Phil AKA Vacunita
----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.
Never mind, I just read the entire description. It says it does support NT. Hopefully it has a floppy or CD with the drivers, because the Netgear page only has XP drivers apparently.
----------------------------------
Phil AKA Vacunita
----------------------------------
Ignorance is not necessarily Bliss, case in point:
Unknown has caused an Unknown Error on Unknown and must be shutdown to prevent damage to Unknown.
- Status
Similar threads
