Windows Error Recovery after Suspend 1

[ribett]

I perform a clean install of Vista Ultimate without no problems, except for this:

After suspend my laptop (default option), always boot to Windows Error Recovery screen and say that windows didn't shut down successfully. I choose Normal Startup and everything it's normal.

I update my nvidia drivers to 160.03 (from

http://www.laptopvideo2go.com)

and didn't fix it.

Any ideas?

Thanks in advance.

 

[linney]

Try running ChkDsk to check your drive for errors. Right-click your Drive icon/ Properties/ Tools/ Error Checking. Select both boxes.

Have you tried setting your Bios to its Safe defaults, or checking if there is any Bios update available.

These XP articles are equally useful in Vista.


HOW TO: Verify Unsigned Device Drivers in Windows XP

http://support.microsoft.com/support/kb/articles/q308/5/14.asp

310353 - How to Perform a Clean Boot in Windows XP

http://support.microsoft.com/default.aspx?scid=kb;en-us;310353&FR=1&PA=1&SD=HSCH

316434 - HOW TO: Perform Advanced Clean-Boot Troubleshooting in Windows XP

http://support.microsoft.com/default.aspx?scid=kb;en-us;316434&FR=1&PA=1&SD=HSCH

310560 - How to Troubleshoot By Using the Msconfig Utility in Windows XP

http://support.microsoft.com/default.aspx?scid=kb;en-us;310560&FR=1&PA=1&SD=HSCH

You could try the System File Checker program.

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program generates in Windows Vista

http://support.microsoft.com/kb/928228

 

[ribett]

Thanks linney, HD is fine. SFC is fine. Bios is fine.

I used msconfig to make clean boots, and found that disabling the Plug and Play service fix it.

I tried to enable Plug and Play service and disable one by one his dependencies, but didnt work.

I could not fix it, I'll change to hibernate.

 

[smah]

Do you have any add-on devices connected, and if so, have you tested without them? Printers, card readers, USB mice, etc.

 

[ribett]

Not add-on devices.


I solved activating "hybrid suspension" in the advanced power configuration.

Thanks for your help.