I have a Fujitsu Stylistic 2300 Tablet PC that I am trying to install Win 98 on a formatted HD. I have an external floppy which works fine and a USB CD-R 2.0 in which I can only get so far with during the begining of installation.
I tried DUSE by itself using the USB DOS CD ROM Boot Disk I got from bgdf.com but it only said SSB Drive Support Enabled; Drive (not installed). I then tried to add the DUSE files to a Win 98 Startup disk along with:
*Config.sys*
device=a:\himem.sys
devicehigh=a:\emm386.exe
device=USBCD1.sys /d:CDROM and
*autoexec*
a:\mscdex.exe /D:CDROM /L:d
After this the startup disk loads and I choose Start setup from CD ROM.
I get: Device Name: OEMCD001: no drives found, aborting Instalation.
Further on down I get an Error: An XMS driver is already installed. XMS driver not installed then continues to load. Pause...then DUSE loads and it shows that it found my CD ROM and continues to go to the Win 98 Setup Screen. I press Enter to continue and I get this:
Windows Setup requires 'largest executable program size' to be at least 442368 bytes to run. Please remove any floppy disk from your drives and restart. I remove drive and restart but I get an invalid system disk. Can anyone help me get this cd rom installed so I can continue instalation??? Thanks
Brian
I tried DUSE by itself using the USB DOS CD ROM Boot Disk I got from bgdf.com but it only said SSB Drive Support Enabled; Drive (not installed). I then tried to add the DUSE files to a Win 98 Startup disk along with:
*Config.sys*
device=a:\himem.sys
devicehigh=a:\emm386.exe
device=USBCD1.sys /d:CDROM and
*autoexec*
a:\mscdex.exe /D:CDROM /L:d
After this the startup disk loads and I choose Start setup from CD ROM.
I get: Device Name: OEMCD001: no drives found, aborting Instalation.
Further on down I get an Error: An XMS driver is already installed. XMS driver not installed then continues to load. Pause...then DUSE loads and it shows that it found my CD ROM and continues to go to the Win 98 Setup Screen. I press Enter to continue and I get this:
Windows Setup requires 'largest executable program size' to be at least 442368 bytes to run. Please remove any floppy disk from your drives and restart. I remove drive and restart but I get an invalid system disk. Can anyone help me get this cd rom installed so I can continue instalation??? Thanks
Brian