Win 98 Exception 0D Vxd error

[tbalza]

This is the error message that I am getting when reinstalling Win 98 second edition


An exception 0D has occurred at 0028:000FD2FA in Vxd ---
This was called from 0028:C1828398
in Vxd sci1hlp(03)+00000588

It may be possible to continue normally
Press any key

I do press any key and the machine freezes on me
Please help !!!!

Thanks
TB

 

[runas]

Care to re-install your OS?

 

[tbalza]

I have tried several times with the same results..
This message was present before I tried to Reinstall Win 98
TB

 

[TekTippy4U]

What kind of PC.?
circa..(How Old)?
When in the install process does message appear?

TT4U

Notification:
These are just "my" thoughts....and should be carefully measured against other opinions....I try very hard to impart correct info at all times.

 

[TekTippy4U]

Look what I found for U

http://support.microsoft.com/?kbid=197004.....

Let us all know...OK?

TT4U

Notification:
These are just "my" thoughts....and should be carefully measured against other opinions....I try very hard to impart correct info at all times.

 

[TekTippy4U]

And look at this Gold Mine in case that last one wasn't specific enough.....

http://www.google.com/search?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=Vxd+scsi1hlp(03)&btnG=Google+Search

In you're original Post, there's no VXD name mentioned in
An exception 0D has occurred at 0028:000FD2FA in Vxd
so it's that much tougher to tell....

Also sci1hlp(03)
should be scsi1hlp(03)

TT4U

Notification:
These are just "my" thoughts....and should be carefully measured against other opinions....I try very hard to impart correct info at all times.

 

[tbalza]

You are correct TT4U I just tried again and the error msg
changed to

An exeption at 0E has occurred at 0028:611CF0c1 in Vxd ---
This was called from 0028:C1828398


and I made a mistake it should also read scsi1hlp for the original error

My machine is a 3 year old clone with Win 98Se pentium 600mgz cd and cd burner 256k Ram 27 Gig H/D

 

[tbalza]

I think I found my solution here TT4U

http://www.techadvice.com/issues/how-to.asp?word1=vxd&word2=scsi1hlp

Yeap it Works...

thanks Buddy
TB

 

[TekTippy4U]

Way Cool...

Was it the scsi1hlp.vxd.....?
or the idecdvsd.vxd...?

You know...I was hoping you'd track it down through some links without getting into whether or not you were using an ScSi Drive and all that....:>)

I bet you have a command line in Config.sys or Autoexec.bat referring to the loading of this file....or even a startup file....
Either way the problem is resolved cause Windoze can't find it since you've renamed it probably..



TT4U

Notification:
These are just "my" thoughts....and should be carefully measured against other opinions....I try very hard to impart correct info at all times.