Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Will EMC PowerPath affect existing SSA and SCSI disk names on AIX?

Status
Not open for further replies.

bingS4

Programmer
Dec 13, 2006
3
US
I'm installing EMC PowerPath on AIX 5.2 for the first time to work with out CLARiiON CX3-20c. I have a large number of existing SSA and a couple SCSI disks on the host.

Will installing EMC PowerPath affect how those disks are accessed/named in any way? My hunch is "no", but I've been unable to locate any explicit information about them. The manual says to varyoff any volume groups on "storage-system hdisk devices". I assume this means SAN storage, and that my SSA hdisks will not be converted into hdiskpower devices, but I need to make sure before I do this.

Any help, please?

Thanks!
 
It shouldn't touch or change any hdisk names. It will add/change hdiskpowerXX when it discovers redundant hdisks pointing to the same EMC lun.

PowerPath will find these redundant hdisks (paths) and add a single hdiskpowerX for each lun. The hdiskpower is what you will use for your volume groups etc.

A command or 2 to commit to memory:
powermt display
(will show you a list of HBAs and how many LUNS/Paths on each)
powermt display dev=all
(shows a list of luns with the backend clariion name, and the local hdisk name, as well as the hdiskpower name).

Example:

->sudo powermt display dev=all
Pseudo name=hdiskpower1
CLARiiON ID=APM00050200571 [R6KWMSTR_SG]
Logical device ID=60060160370313000EAE471445F2DB11 [LUN 83]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
0 fscsi0 hdisk15 SP A0 active alive 0 0
0 fscsi0 hdisk18 SP A3 active alive 0 0
0 fscsi0 hdisk21 SP B0 active alive 0 0
0 fscsi0 hdisk24 SP B2 active alive 0 0

Pseudo name=hdiskpower0
CLARiiON ID=APM00050200571 [R6KWMSTR_SG]
Logical device ID=6006016037031300564BA52645F2DB11 [LUN 95]
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
0 fscsi0 hdisk16 SP A0 active alive 0 0
0 fscsi0 hdisk19 SP A3 active alive 0 0
0 fscsi0 hdisk22 SP B0 active alive 0 0
0 fscsi0 hdisk25 SP B2 active alive 0 0



This host only has 1 HBA since its a dev box. Production boxes would 2 here. As you can hdisk 16, 19, 22 and 25 are all really the same LUN, and powerpath groups them together to become hdiskpower0
 
Thanks for the reply! I installed and everything worked great.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top