Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wierd !!!!

Status
Not open for further replies.

wellco

Vendor
Mar 4, 2003
79
US
Trying to remove all programming from G3iR6, everything gone except have some extension numbers in "list ext" that show up as "phantom user" I have looked everywhere and can't find them...they show up with a COR 127 not even available on this release...Any ideas?
 
They are probably the park orbits installed on the operator consoles. Do a "cha con" and look for the call park definitions near the bottom of the page.
 
change console-parameters

Page 2 has "Common Shared Extensions"

Removing these may clear it up.
 
Sorry guy's I checked those also and removed them, they are not the culprit...any other suggestions? I have checked everything...hunt groups, term groups, data ext...ect
 
Do a 'disp sys sec' to see if you have any security voilations set up as phantom extensions.

Also, what are the names of these phantom extensions? That info may help.
 
I checked "disp sys sec" nothing there either....The ext only list as:

1020 phantom-user 127 1/1
1030 phantom-user 127 1/1

and so on..there are approx 10 of these....
 
loud speaker paging???


We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.
 
Checked "paging loud" also....nothing there..This is starting to drive me nuts ( actually a putt) But someone has to know.......I sure don't.
 
Crisis alerts? (cha sys crisis)
Remote access barrier codes? (cha remote)


Susan
"A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort."
- Herm Albright (1876 - 1944)
 
Can you do a "display capacity" and see if this gives you any clues? If there's something you've adminstered hopefully it should show here
 
Finally found it....this is one for your little black books...
Someone was screwing around and assigned:

Loudspeaker paging Code Calling...nobody uses that !!!!!
Had to go to "cha paging loud code"
and there they were..
Thanks for all the suggestions and help..as usual your great
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top