Why only Contivity is accessible when BOT is up

[Skyfall]

I set up a BOT between Contivity 221 and a 1100. It is up and running, but I can only ping and access the remote contivity 1100's interface 0 (LAN) IP address and management IP address. No any of other LAN PCs is accessible. When set up BOT I already configureed the local network and remote network.
Any idea why this happened, seems it is common for me, sometime I set up BOT with no issue, sometimes just like today, but almost no difference in setting up.

Life is keeping learning......

 

[VPNSteve]

Two things -

Check the System->Forwarding on the 1100 and make sure that you are allowing branch office to end user traffic. The other is to make sure that the resources on the other side have routing back across the tunnel. In other words, make sure the PC you have on that LAN knows that the 1.2.3.0 network is accessible through the 1100. Do a route print from a dos prompt and see if it has a route to the network on the 221 side.

 

[Skyfall]

Yes, the 2nd point, you are right. Once I config the PC's default gateway point to 1100, it is accessible. Thanks man.

Life is keeping learning......