Who manufactured my IDE controller card? 1

[pcrecycle]

I recently purchased about 20 old 80386 systems to recycle for kids in the area to learn on. They came without hard drives so I purchased a few very low capacity drives to put in them. The first couple went fine, no problems. But some are giving me HDD controller failure errors. I know the drives are good, tested them on other computers. They are jumpered correctly, and set in the bios right. So i went to the controller card, I unplugged all other devices from the card one by one--nothing. So I'm guessing the card is not jumpered correctly. My problem is I can't find the manu. of it anywhere!! Installed on the card is a printer and serial port, pins for game, com2, fd, and hd. 7 jumpers on top left corner. A couple of the chips have names--Twinhead and Zilog-- and the card itself says Magic AT I/O Plus. No FCC-ID anywhere. IF anyone has any idea who could tell me the jumper settings on this card it would be greatly appreciated.

 

[Snickle]

I found 3 entries at Google:

http://www.google.com/search?hl=en&ie=UTF-8&oe=UTF-8&q="Magic+AT+I/O+Plus"&btnG=Google+Search

 

[pcrecycle]

Thanks for taking the time to help me out. Google is one I didn't think to use. Appreciate it!!

 

[mainegeek]

You can look for the FCC Id # on the card and do a search with that as well.