Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Where to Get patches?

Status
Not open for further replies.

cbice

IS-IT--Management
Feb 6, 2007
12
US
I have a BCM 400 with BCM 3.0 installed. I was wanting to see if I could get it upgraded to a newer version of the software. Any thoughts would be extremely helpful.
 
BCM 3.0/3.5 -> BCM 3.6 -> BCM4.0 > NTAB9950 BCM 3.6 Software Upgrade Kit (from 3.0, 3.01 or 3.5), and > NTAB3603 BCM 3.6 to BCM 4.0 Software Upgrade Kit > Software Upgrade preserving customer data

BingBang
 
Bing, thanks for the info. Whenever i upgrade, will i loose my keys and all of the features I have now or wuill they just upgrade with it?
 
No problem with 3.6 but with 4.0 there's couple of things to verify before the upgrade. If you have Companion keykodes for example, you will loose it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top