Where to find NEC MAT Commands?

[stevenerie]

Hello,

I have a NEC NEAX 2400IPX PBX. I am wondering if anyone knows where I can find a list of commands for the NEC MAT software?

This is so I can use the RUN COMMAND option at the bottom of the screen.

Right now I have three alarm lights on my box from a provider outage and I need to run the command to clear them.

Any help is appreciated.

Thanks!

-Steve

 

[Billz66]

dftm will diplay fault buffer

Ralm once should clear the alarm
dont exit and Ralm again will clear the alarm buffer as well

I think the job specification manual contains a listr

 

[3racefan3]

FYI...DFTD on the IPX not DFTM.

 

[Billz66]

dsylexia its a killer

I know it was soemthing like that

 

[davidshq]

Search on google for something like NEAX 2400 IPX PDF. Should see some e-copies of various manuals. Unfortunately, the documentation is not written in a friendly manner...it takes quite a bit of deciphering to understand correctly.
Dave.

 

[stevenerie]

Thanks to everyone who has responded so far. The DFTD command did it for me. I also found that I could clear the alarm lights and leave the alarm database intact by lifting up the front lid on the box and pressing the white "ALARM RESET" button.

Despite the power of GOOGLE, I have yet to find a manual or encyclopedia of MAT commands. So, I guess I will just continue developing my own.

 

[davidshq]

Hmmm...maybe the specific manual names will be of assistance. You probably need:
- ISDN Feature Programming Manual
- Office Data Specifications
- System Operations and Maintenance Manual

AFAIK there is no MAT-only manual - each of these manuals includes a significant number of MAT commands, but not all of them and also includes other info.
Dave.

 

[grh959]

The closest thing you are going to find with regards to MAT commands is NEC 2400 ICS Command Manual.

Try here:

telecomcepts.com/downloads/Neax2400/ICS%20Command%20Manual.pdf

 

[Billz66]

try this one

http://www.mediafire.com/?o892fkei94418c7