Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

When I turn PC on nothing loads, monitor stays black...

Status
Not open for further replies.

javierdlm001

Technical User
Jun 28, 2008
264
CA
I had just attempted to use an Acer desktop USB Recovery drive, unsuccessfully.
Then even though I had set up the booting order to start from another USB drive with Linux, it would read the USB drive, but wouldn't load it. Instead it would go back to the Acer Recovery drive files, and try to run that again, as if it had kept that in the HD. Oh sorry, I was using my USB Acer Recovery drive to reinstall Win10 by the way.
Now it's even worst because it won't even load anything at all, not even BIOS! In fact the monitor is just plain black. I can see the pc is on, but that's it.

I suspect the Acer desktop USB Recovery drive didn't work because it said that a part was missing, something like that. I guess since I changed the order of the drives when I introduced the SSD drive, the recovery process was expecting to find a different configuration.
What now?

Should I remove the SSD drive and see what gives?

Thanks guys
 
Someone had recommended that I remove the SSD, this would allow me to see the HD drive again, then do the Win10 installation on it.
I'll try that tomorrow
 
So, removing the SSD did help to regain access to the BIOS and somewhat control what it boots on.
It still refuses to boot from my Linux Live USB drive. Instead it continues loading the previous Recovery process.
However, it works to run the Windows 10 installer in the USB drive I made (go figure!). I have not run it because I still want to be able to see the contents of this HD, I am hoping it didn't erase it.
Just in case there's something wrong with my Linux USB drive, I am about to make another one to try. If that still doesn't succeed to boot from, I don't know what can I do to check the HD contents. Maybe I can bring that HD to my older pc.
Btw, I also disabled Windows Boot Manager in Bios. It was the 2nd alternative after the USB drive.

It would be nice to hear what you guys think though.
 
I was able to access the contents of my HD with the new Linux USB drive after all.
Things are moving along now :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top