Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weird issue

Status
Not open for further replies.

thephonelady

Vendor
Feb 27, 2004
480
US
Hi all!! Have a customer with R9 and when a call comes in it rings normally and there is what sounds like a single touch tone at the end of every ring cycle. It is lower in volume than the regular incoming ring and happens on all calls/ phones. Power cycled and reseated all modules.
Anyone ever had this issue.
Thanks [ponder]
 
ring beep?
is that heard on the callers end or on the ringing phones?

I bet on the callers side, the calls are ringing straight in or are going through auto attendant and are transferred?



Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
Westi- All calls ring to a group. That tone right at the end of the ring cycle is not heard on internal station to station calls. I am going to have the customer try calling the group and see if they hear the tone.
 
Sounds like Line Appearance buttons with abbreviated ring enabled.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top