weighted fair

[luvcisco]

Please someone tell me why this is indicating 0kb bw available
Here is the complete config output:
router1#sho queue atm2/0.1
Interface ATM2/0.1 VC 1/69
Queueing strategy: weighted fair
Total output drops per VC: 0
Output queue: 0/512/64/0 (size/max total/threshold/drops)
Conversations 0/1/128 (active/max active/max total)
Reserved Conversations 3/3 (allocated/max allocated)
Available Bandwidth 0 kilobits/sec

Here is the same output from the mirror router:
router2#sho queue atm2/0.1
Interface ATM2/0.1 VC 1/69
Queueing strategy: weighted fair
Total output drops per VC: 0
Output queue: 0/512/64/0 (size/max total/threshold/drops)
Conversations 0/1/128 (active/max active/max total)
Reserved Conversations 3/3 (allocated/max allocated)
Available Bandwidth 1506 kilobits/sec

 

[baddos]

Is the bandiwidth command not issued for that interface? It shouldn't need to be, but try it.

 

[luvcisco]

Yes it is:
interface ATM2/0.1 point-to-point
mtu 1500
bandwidth 6144
ip address 10.1.132.66 255.255.255.224
ip nat outside
ip ospf cost 48
ip ospf hello-interval 1
ip ospf retransmit-interval 3
pvc 1/69
vbr-nrt 9264 6144 100
max-reserved-bandwidth 95
oam-pvc 0
encapsulation aal5snap
service-policy output "name"

 

[chieftan999]

The bandwidth command is used to control routing aspects of OSPF (not the actual Bandwidth of the interface).

Reamin positive. The affect on those around you will amaze.