I was having a lot of issues with webaccess so I followed the following TID 10054953 to remove and reinstall it. After installing it from the latest patched software folder I tried to create the webaccess internet agent in NWADMIN but could not find the option anywere. I looked both on the NDS side and on the groupwise view side. Any help on this would be most appreciated. Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Webaccess Installation
- Thread starter slobber
- Start date
1. In the NDS view of NWADMIN (not the groupwise view) highlight the GroupWise Domain.
2. Right click on the Domain and choose "Create"
3. Select "GroupWise Gateway/Internet Agent
4. Select Gateway (to include web agent) and fill out your properties.
This should work for you.
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
2. Right click on the Domain and choose "Create"
3. Select "GroupWise Gateway/Internet Agent
4. Select Gateway (to include web agent) and fill out your properties.
This should work for you.
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
- Thread starter
- #3
- Thread starter
- #4
- Thread starter
- #6
So you can get to the main page of your GroupWise system but when you click on GO you get a 500 or a 404 error?
One quick thing to check is to make sure you have a virtual directory under your main groupwise web access site for the CGI-BIN. I'm assuming your running it on a windows system if not I may be limited on the help I can give you.
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
One quick thing to check is to make sure you have a virtual directory under your main groupwise web access site for the CGI-BIN. I'm assuming your running it on a windows system if not I may be limited on the help I can give you.
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
Also what version are we dealing with? I'm assuming (once again) since you're using NWAdmin your still on 5.5 and not on 6.x
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
david e
*end users are just like computers, some you can work with...others just need a simple reBOOTing to fix their problems.*
- Status
Similar threads
