I have a Watchguard X500 and would like to have my mobile users connect to a new RRAS Server. I have setup the following policies and am currently connecting from my XP laptop to the Firebox. The VPN connects, but not to the server, it is connecting at the Firebox for some reason.
I have NAT setup to allow port tcp 1723 to forward from any to RRAS ip.
I have ports ip 50, udp 500, udp 4500 for ipsec open from any to RRAS ip and to any from RRAS ip.
I have tcp 1723 and ip 47 open from any to RRAS ip and from RRAS ip to any.
I have viewed the following thread and got some info, but not a solution. thread872-1258993
Any help would be appreciated. I believe it could be just an auth issue, since the firebox is authenticating and not forwarding to the RRAS.
I have the Firebox Authentication set at default, which is Firebox Auth.
I have NAT setup to allow port tcp 1723 to forward from any to RRAS ip.
I have ports ip 50, udp 500, udp 4500 for ipsec open from any to RRAS ip and to any from RRAS ip.
I have tcp 1723 and ip 47 open from any to RRAS ip and from RRAS ip to any.
I have viewed the following thread and got some info, but not a solution. thread872-1258993
Any help would be appreciated. I believe it could be just an auth issue, since the firebox is authenticating and not forwarding to the RRAS.
I have the Firebox Authentication set at default, which is Firebox Auth.